SGS® 01253 M3SL Fractional Long Length Square End Mill, 0.115 in Dia Cutter, 0.575 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated
SGS® 01253 M3SL Fractional Long Length Square End Mill, 0.115 in Dia Cutter, 0.575 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated
SGS® 01253 M3SL Fractional Long Length Square End Mill, 0.115 in Dia Cutter, 0.575 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated

Click to enlarge
Dynabrade
01253

SGS® 01253 M3SL Fractional Long Length Square End Mill, 0.115 in Dia Cutter, 0.575 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated

SGS® 01253 M3SL Fractional Long Length Square End Mill, 0.115 in Dia Cutter, 0.575 in Length of Cut, 3 Flutes, 1/8 in Dia Shank, 2-1/2 in OAL, Uncoated

Catalog Number:
Manufacturer: Dynabrade
Brand: Dynabrade
Item ID: DYNP 01253
MPN: 01253
Min Order Qty: 1

SGS® Square End Mill, Fractional Long Length, Series: M3SL, 0.115 in Diameter Cutter, 2-1/2 in Overall Length, 0.575 in Length of Cut, 3 Flutes, Spiral Flute, 1/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Common Shank, 1.925 in Shank Length, Solid Carbide, Uncoated

Sold As: 1/PK
Springfield

Features

  • Three flute design features improved chip space over four flutes and increased strength and feed capability over two flutes
  • Proprietary coating allows for superior chip flow, driving industry leading productivity and value, even at low spindle speeds
  • Advanced geometries that extend tool life, reduce chatter, cut cycle times, and improve part quality

Specifications

Cutter Diameter
0.115 in
Cutting Direction
Right Hand
Finish
Uncoated
Flute Type
Spiral
Helix Angle
30 deg
Length of Cut
0.575 in
Material
Solid Carbide
Number of Flutes
3
Overall Length
2-1/2 in
Series
M3SL
Shank Diameter
1/8 in
Shank Length
1.925 in
Shank Type
Common
Type
Fractional Long Length

SGS® Square End Mill, Fractional Long Length, Series: M3SL, 0.115 in Diameter Cutter, 2-1/2 in Overall Length, 0.575 in Length of Cut, 3 Flutes, Spiral Flute, 1/8 in Shank Diameter, Right Hand Cutting Direction, 30 deg Helix Angle, Common Shank, 1.925 in Shank Length, Solid Carbide, Uncoated

Resources

  • SGS 301 Catalog https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_301_Catalog.pdf
  • SGS 00988 RoHS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_RoHS.pdf
  • SGS 00988 SDS https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_00988_SDS.pdf
  • SGS 301 Specification Sheet https://externalassets.unilogcorp.com/ASSETS/DOCUMENTS/ITEMS/EN/SGS_301_Specification_Sheet.pdf